Glossary of rail transport terms

src: www.american-rails.com

Rail terminology is a form of technical terminology. The difference between the American term railroad and the international term railway (used by the International Union of Railways and English-speaking countries outside the United States) is the most significant difference in rail terminology. There are also others, due to the parallel development of rail transport systems in different parts of the world.

Various global terms are presented here; where a term has multiple names, this is indicated. The abbreviation "UIC" refers to standard terms adopted by the International Union of Railways in its official publications and thesaurus.

Video Glossary of rail transport terms

0-9

Maps Glossary of rail transport terms

A

Absolute block signalling: A British signalling scheme designed to ensure the safe operation of a railway by allowing only one train to occupy a defined section of track (block) at a time
Adhesion railway: The most common type of railway, where power is applied by driving some or all of the wheels of the locomotive
Adhesive weight: The weight on the driving wheels of a locomotive, which determines the frictional grip between wheels and rail, and hence the drawbar pull which a locomotive can exert
Air brake: A power braking system with compressed air as the operating medium
Alerter or watchdog: Similar to the dead man's switch other than it does not require the operator's constant interaction. Instead, an alarm is sounded at a preset interval in which the operator must respond by pressing a button to reset the alarm and timer if no other controls are operated. If the operator does not respond within a preset time, the prime mover is automatically throttled back to idle and the brakes are automatically applied.
All weather adhesion: The adhesion available during traction mode with 99% reliability in all weather conditions
Alternator: An electrical generator that converts mechanical energy to electrical energy in the form of alternating current
American Locomotive Company (ALCO): The second largest builder of steam locomotives in the United States
American type: A steam locomotive with a 4-4-0 wheel arrangement
Angle cock: A valve affixed to each end of a piece of rolling stock that, when opened, admits compressed air to the brake pipe (or vents it to the atmosphere if air hose is detached)
Articulated locomotive: A steam locomotive with one or more engine units that can move relative to the main frame
Articulation: The sharing of one truck by adjacent ends of two rail vehicles
Ashpan: A feature of a locomotive which has the same form and purpose as the domestic variety (i.e. to collect the ashes which fall through the bars of the grate). The only significant difference is the size, measured in feet rather than inches.
Asynchronous: An alternating current electric motor whose speed varies with load and has no fixed relation to the frequency of the supply
Atlantic type: A steam locomotive with a 4-4-2 wheel arrangement
Automatic block signaling (ABS): A system that consists of a series of signals that divide a railway line into a series of blocks and then functions to control the movement of trains between them through automatic signals
Automatic train control (ATC): A general class of train protection systems for railways that involves a speed control mechanism in response to external inputs
Automatic train operation (ATO): An operational safety enhancement device used to help automate operations of trains
Automatic train protection (ATP): A system that enforces obedience to signals and speed restrictions by speed supervision, including automatic stop at signals
Autotrain: A branch-line train consisting of a steam locomotive and passenger carriages that can be driven from either end by means of rodding to the regulator and an additional vacuum brake valve. The fireman remains with the locomotive and, when the driver is at the other end, the fireman controls the cut off and vacuum ejectors in addition to his usual duties. See also: Push-pull train.
Axlebox or axle box: The housing that holds the axle bearings of a locomotive; The housing attaching the end of the axle to the bogie which contains the bearing allowing the axle to rotate. See also journal box below.

src: upload.wikimedia.org

B

Bad order: A tag or note applied to a defective piece of equipment. Generally, equipment tagged as bad order is not to be used until repairs are performed and the equipment is inspected and approved for use.
Bail off: To release the locomotive brakes while the train brakes are being applied in order to permit smoother handling and prevent excessive slack, wheel slide and flat wheels
Balancing: The reciprocation and revolving masses of any steam, diesel or electric locomotive need balancing, if it is to work smoothly. Revolving masses can easily be balanced by counterweights, but the balancing of reciprocating parts is a matter of compromise and judgement.
Balise: A transponder that is used as a intermittent data point in an automatic train protection (ATP) system or as reference point for train location in radio-based train control
Ballast: Aggregate stone, gravel, or cinders forming the track bed on which sleepers (ties) and track are laid to ensure stability and proper drainage
Ballast tamper: See Tamping machine.
Balloon: A looped length of track, usually at the end of a spur or branch, which allows trains to turn around for the return trip without reversing or shunting. Can be used as part of a freight installation to allow the loading or unloading of bulk materials without the need to stop the train (see merry-go-round train (MGR)).
Bay platform: A platform and track arrangement where the train pulls into a siding, or dead-end, when serving the platform
Beep: A one-of-a-kind switcher locomotive (also referred to as the SWBLW) built by the Atchison, Topeka and Santa Fe Railway in 1970
Bellmouth: A widening of an underground rail tunnel, in preparation for future connection or expansion of service. Used particularly in subway nomenclature.
Berkshire type: A steam locomotive with a 2-8-4 wheel arrangement
Blastpipe: A part of a steam locomotive that discharges exhaust steam from the cylinders into the smokebox beneath the chimney in order to increase the draught through the fire
Block section: A section of track in a fixed block system which a train may only enter when it is not occupied by other vehicles
Bo-Bo (Europe): A locomotive with a four-wheel per truck configuration, each individually powered, as opposed to a six-wheel "Co-Co" configuration
Boiler: A cylindrical container adjacent to the firebox in which steam is produced to drive a steam locomotive
Bolster: A transverse floating beam member of a truck suspension system supporting the weight of a vehicle body
Boom barrier: A pivoted road barrier at a level crossing
Booster engine: An extra set of cylinders that can be engaged on a steam locomotive to drive a trailing truck or tender truck to give additional tractive effort at starting and low speeds
Brakeman's cabin or brakeman's cab: A small hut at one end of a railway wagon to protect the brakeman from the elements
Brake pipe: The main air pipe of a train's air brake system
Branch line: A secondary railway line that splits off from a main line
Brick arch: A brick or concrete baffle provided at the front of a locomotive firebox below the tubes, in order to extend the flame path. Early locomotives burned coke; provision of a brick arch was necessary before coal could be used without producing excessive smoke.
British Rail Universal Trolley Equipment (BRUTE): A type of platform trolley found on stations all over the UK rail network from the late 1960s to the early 1980s
Broad gauge: Track where the rails are spaced farther apart than standard gauge, or 1,435 mm (4 ft 8 ¹/₂ in)
Bubble car: A nickname for a British Rail Class 121 railcar
Buckeye coupler: A side-operated version of the top- or bottom-operated Janney coupler
Buffer: A device that cushions the ends of rail vehicles against each other
Buffer stop or bumper post: The barrier installed at the end of a dead-end track to prevent rail vehicles from proceeding further
Builder's plate: The nameplate fitted by their manufacturer to locomotives and items of rolling stock
Bulkhead flatcar: An open-top flatcar with a wall at each end
Bungalow: The housing for signals and communications computers that control switches, crossings, and other such controls, relaying information to and from the rail traffic control (RTC)
Bustitution: A portmanteau of the words "bus" and "substitution", the practice of replacing a train service with one provided by buses, whether as a temporary or a permanent measure

Glossary of Freight Terms | Celtic Marine and Logistics

src: celticmarine.com

C

Cab: The control room of a locomotive housing the engine crew and their control consoles
Cab forward: A steam locomotive with its cab at the leading end of the boiler, rather than the usual trailing end adjacent to the tender. The best known example is the Southern Pacific Railroad's AC type, built to handle drag freights through the SP's many tunnels and snow sheds without the danger of the exhaust asphyxiating the engine crew.
Cabless: A locomotive without a cab. Commonly referred to as a B unit or a Slug, although not all Slugs are cabless.
Caboose: A railroad car attached usually to the end of a train, in which railroad workers could ride and monitor track and rolling stock conditions. Largely obsolete, having been replaced by the electronic end-of-train device (ETD), or flashing rear-end device (FRED).
Cant: The angle of an individual rail relative to vertical (e.g. around curves)
Carbody unit: A locomotive which derives its structural strength from a bridge-truss design framework in the sides and roof, which cover the full width of the locomotive
Catenary: The overhead wire system used to send electricity to an electric locomotive or multiple unit, tram or light rail vehicle
Centerbeam: A bulkhead flatcar with a braced beam bisecting its length, used to transport lumber products
Challenger type: A steam locomotive with a 4-6-6-4 wheel arrangement
Co-Co (EU): A heavier duty locomotive with six wheels per bogie (all axles being separately driven) configuration as opposed to a four-wheel "Bo-Bo" configuration. The correct classification is Co'Co', but Co-Co is used more often.
Coal pusher: A steam-operated device in the tender intended to push coal forward to a point where it can be shovelled directly into the fire
Colour light signal: A signal in which the colour of the light determines the meaning of the aspect shown
Colour position signal: A signaling system that uses both colour and light position to determine the meaning of the aspect shown
Combined power handle: A handle or lever which controls both the throttle and the dynamic braking on the locomotive: on a desktop-type control stand, forward (away from operator) past center operates the dynamic brake, backward (toward operator) past center, is throttle up
Command: Order used to perform a function in a system. Adapted by replacing UGTMS with AoE.
Compound locomotive: A steam locomotive passing steam through two sets of cylinders. One set uses high pressure steam, then passes the low pressure exhausted steam to the second.
Configurable System: Capability of the system to allow users to select, from pre-programmed functions (modular software units), those which are necessary to accomplish a control strategy or other complex functions, without the use of computer language
Consist: Single vehicle or a group of vehicles which are not separated during normal operation
Consolidation type: A steam locomotive with a 2-8-0 wheel arrangement
Constituent: Any elementary component, group of components, sub-assembly or complete assembly of equipment incorporated or intended to be incorporated into the AoE.
Container on flat car (COFC): The loading of a shipping container onto a simple flat car
Continuous welded rail (CWR): A form of track in which the rails are welded together by utilising the thermite reaction or flash butt welding to form one continuous rail that may be several kilometres long
Control car: A passenger coach which has a full set of train controls at one end, allowing for the use of push-pull train operation
Coupler pulling faces, length over: Effective length of piece of rolling stock
Coupling rods: Rods between crank pins on the wheels, transferring power from a driving axle to a driven axle of a locomotive
Covered goods wagon (UIC): A type of rolling stock with a flat bottom enclosed on all sides and top, which is loaded and unloaded from sliding doors on each side
Cow-calf or cow and calf: A diesel locomotive with a crew cab permanently coupled to and acting as a controller for a similar slave diesel locomotive without a crew cab, primarily used for switching or shunting duties for large groups of rolling stock. Also known as master and slave.
Crank pin: A pin protruding from a wheel into a main or coupling rod
Crosshead: In a steam locomotive, the moving member of a sliding guide which absorbs upward and downward forces from the connecting (main) rod, which otherwise would tend to bend the piston rod
Cut: To uncouple one or more cars from a train (i.e. to "make a cut"); Same as "cutting"
Cut lever: A manual lever which releases the pin of an automatic coupler when pulled to separate cars or locomotives
Cut off: A variable device on steam locomotives which closes the steam valve to the steam cylinder before the end of the piston stroke, thus conserving steam while allowing the steam in the cylinder to expand under its own energy. See also: Reverser handle.
Cutting: A channel dug through a hillside to enable rail track to maintain a shallow gradient. See also embankment.
Cycle braking: Making repeated service brake reductions in short succession to maintain a constant speed on short but steep grades. Each reduction must be at least 5 PSI lower than the previous one in order to keep the brakes applying regularly, but excessive cycle braking can deplete the air supply and require an emergency application.
Cylinder: A cavity in a reciprocating engine in which a piston travels
Cylinder cock: On steam locomotives, this appurtenance allows condensed water to be drained from the steam cylinders when the throttle is opened, thus preventing damage to the pistons, running gear, and cylinder heads

src: www.american-rails.com

D

Dark signal: A block signal that is displaying no discernible aspect, often due to burned out lamps or local power failure. Most railroads require that a dark signal be treated as displaying its most restrictive aspect (e.g. stop and stay for an absolute signal).
Dark territory: A section of track without block signals
Dead man's handle: A safety mechanism on a train controller which automatically applies the brake if a lever is released. It is intended to stop a train if the driver is incapacitated. In some forms, this device may be pedal-actuated. See also Dead-man's vigilance device.
Decapod type: A steam locomotive with a 2-10-0 wheel arrangement
Defect detector: A track side device used to detect various defects such as hotboxes (overheated axle bearings), dragging equipment, leaning cars, overloaded cars, overheight cars, seized (locked) wheels, etc.
Degraded Operation: Operation resulting from an unplanned event that prevents the normal delivery of train services
Demurrage: A monetary charge levied by a railroad to a customer for excessive delay in loading or unloading cars
Derail or derailer: A safety device that will derail vehicles passing it, often used to prevent rolling stock from unintentionally entering the mainline from a siding
Detonator: Small explosive charges placed on the running rail which detonate when run over--used to warn drivers in following trains of an incident ahead
Diamond: Track which allows a rail line to cross another at grade
Diesel multiple unit (DMU): A set of diesel-powered self-propelling passenger rail vehicles able to operate in multiple with other such sets. Such units, especially those consisting of a single vehicle, are sometimes termed railcars.
Direct traffic control (DTC): A system in which train dispatchers communicate directly with train crews via radio to authorize track occupancy in predefined blocks
Distributed power: A practice employed to move large trains through the mountains. Consists of the locomotives on the head end, a "swing" (mid-train) helper or two, and pusher locomotive(s) on the rear; today, all units are remotely controlled by the engineer in the lead unit. The power distribution alleviates stress on the couplers and relieves the lead units of the full weight of the train, making it easier to move on grades.
Ditch lights: A pair of lights, usually found on modern locomotives, located several feet below and outboard of the main headlight, that may alternately flash when the train is sounding its horn
Division: The trackage area under the jurisdiction of a railway superintendent
Dog or dogspike (India): A spike with a slightly altered head shape for easier extraction when the spike has become too loose in the sleeper
Doodlebug: A self-powered gasoline-electric passenger car used for small capacity rural commuter service. Also a British Rail Class 153 DMU.
Double: If a train has insufficient power to climb a grade and no helpers are available, the train will be split into two sections and run separately to the top.
Double heading: A configuration in which two steam locomotives are coupled head-to-tail in order to haul a heavy train up a long or steep hill. In the present day, double heading (and occasionally triple heading) are done primarily on large passenger trains or as a show for railfans.
Drag: A long, heavy freight train moving at low speed
Dragging equipment detector: See Defect detector.
Drawbar: The part of a coupler that attaches to the frame of the car or locomotive; may be equipped with a pneumatic cushion depending on a freight car's design cargo (e.g. an autorack). Alternately, the pinned double bars coupling a steam locomotive to its tender.
Driver or engine driver: The operator of a locomotive
Driver only operation (DO or DOO): Operation of a train by the engineer or driver only. Also known as one person train operation (OPTO)
Driver: A wheel in contact with the rail that also propels a locomotive
Dwarf signal: A signal light that is considerably smaller and closer to the ground than a high-mast signal; often absolute, and placed within interlocking limits, its aspects tend to differ from those conveyed by a taller signal for certain indications. Also called 'pot' or 'jack'.
Dwell time: The time a train spends at a scheduled stop without moving. Typically, this time is spent boarding or deboarding passengers, but it may also be spent waiting for traffic ahead to clear, or idling time in order to get back on schedule.
Dynamic braking: The use of a traction motors' output, working as generators, to retard train speed without relying solely on the air brakes

Opinions on Glossary of rail transport terms

src: upload.wikimedia.org

E

Ejector: A component of vacuum brake system usually fitted in pairs. Steam passing through a cone sucks air from the train pipe to create the vacuum.; A small ejector running continuously to overcome leaks and to restore the vacuum after light braking and a large ejector operated when needed to release the brakes quickly after a heavy application or to create the initial vacuum after coupling
Electric multiple unit (EMU): A set of electrically powered self-propelling passenger rail vehicles able to operate in multiple with other such sets
Electro-Motive Diesel (EMD): The world's second largest builder of railroad locomotives. EMD was previously Electro-Motive Division of General Motors before being sold.
Elevated railway, el, or L: A railway built on supports over city streets
Embankment: A bank, usually of earth but sometimes of stone, constructed to form a level or minimally graded trackbed for a line of railway needing to pass over a depression in the terrain or other pre-existing surface feature. See also cutting.
Empty coaching stock (ECS): A train used to bring carriages into (or out of) service. They usually run between sidings and main stations, with the carriages then forming a service train to another destination. They are often worked under freight train rules (e.g. without needing a guard in the UK).
Emergency release: A device accessible under certain conditions which permits the operation of an apparatus in case of failure
End-cab switcher: A switching locomotive with no short hood, thus having its cab forming one end of its car body
Equalizing reservoir: A small air reservoir in a locomotive control stand. When the automatic brake valve is operated, this reservoir responds by reducing or increasing the air pressure in the brake pipe.
Event recorder: A device that continuously captures analog and digital train systems information and stores that data for a minimum of 48 hours. This data is used to evaluate incidents and accidents. Typical stored data includes speed, brake pressure, dynamic brake, horn activation, track signal, etc. In the U.S., event recorders are mandated by the Federal Railroad Administration (FRA) for freight, passenger and commuter rail. Regulations for railroad outside the U.S. vary by country. Transit operations are not generally required to have event recorders, but have begun to add them voluntarily.
Express train: A train that passes selected stations without stopping
Extra: A train not included in the normal schedule of a railroad. They often run during busy holiday travel periods in order to handle larger crowds and reduce the number of passengers that are forced to stand or are stranded at a station. In train order territory, extras are required to clear the main line for scheduled trains to pass.

src: www.american-rails.com

F

Facing: A turnout that can select which way to diverge a train--the opposite of trailing
Fairlie: A type of articulated locomotive, typically (but not exclusively) with two boilers and connected fireboxes in a central cab
Fall plate: A heavy, hinged steel plate attached in a horizontal position to the rear of the locomotive footplate or front of a locomotive tender. When the tender is attached to its locomotive the plate is allowed to fall to cover the gap in the "floor" between the two units. The sliding edge is not fixed and has a smooth chamfer so as to avoid a trip hazard.
Feedwater heater: A device to preheat the water for a steam locomotive to improve efficiency
Feed valve or regulating valve: A valve which controls the amount of air pressure being channelled from the locomotive's main reservoir to the brake pipe, in accordance with the set pressure in the equalizing reservoir
Fiddle yard: In railway modelling, a concealed group of sidings used to provide more realistic operation in a limited space
Firebox: In steam locomotives, a chamber in which a fire is made to produce sufficient heat to create steam once the hot gases created there are carried into the adjacent boiler via tubes or flues
Fireman, stoker, or boilerman: A worker whose primary job is to shovel coal into the firebox and ensure that the boiler maintains sufficient steam pressure
Flat: A wheel defect where the tread of a wheel has a flat spot and is no longer round; flats can be heard as regular clicking or banging noises when the wheel passes by. This is caused either by a locked bearing, or a brake that was not fully released before the car was moved, dragging the wheel without turning.
Flying junction or flyover: A railway junction that has a track configuration in which merging or crossing railroad lines provide track connections with each other without requiring trains to cross in front of opposing traffic on the same level
Fouling point: The point of a switch turnout where a car or locomotive on one track will obstruct movement on the adjacent track
Four-quadrant gate: A type of boom barrier
Free-mo: A type of modular layout in model railroading
Freight wagon (UIC): A rail vehicle designed for the carriage of freight
Full service reduction: The maximum air pressure that can be exerted against brake pistons in a normal brake application. To increase pressure beyond this point, the brakes must be placed in emergency.
Fusee: A pyrotechnic device similar to an automotive flare that is used in signalling
Fusible plug: A threaded plug, with a soft metal core, that is screwed into the crown plate of a firebox. If the water level gets too low the core melts and the noise of the escaping steam warns the enginemen.

LTL Freight Trucking 101 - Glossary of Trucking Terms - LTL ...

src: www.hotlinefreight.com

G

Garratt: A type of steam locomotive that is articulated into three parts
Gauge: The width between the inner faces of the rails
Geep: Any of the GP ("general-purpose") series of Electro-Motive four-axle diesel locomotives; originally applied only to EMD GP7, GP9, and GP18 models
Generator field: The control switch of a diesel-electric locomotive that opens or closes the circuit between the main generator and the traction motors
Get a knuckle: To break a train in two, usually by shearing the knuckle pin in a coupler, often caused by the application of excessive head end power at startup
GEVO: A nickname for General Electric's Evolution series of modern diesel locomotives
Gladhand connector: A quick coupling and uncoupling connector at the end of a trainline air hose that resembles a pair of shaking hands when hoses are connected
Go-devil: A hand-powered railroad car (see Handcar and Draisine), or a small gasoline powered railroad car
Grab bar or grab iron: A handle on the side of a car to allow switching personnel to hold on
Green: A colour associated with go or proceed

GLOSSARY OF MARITIME & TRANSPORT TERMS (PART II) | Karatzas ...

src: shipbrokerage.files.wordpress.com

H

Harmonic rock or harmonic rock and roll: The condition of locomotives and cars swaying in opposite directions when traversing depressions on the roadbed. A potentially dangerous condition that can cause coupler damage, lading damage, or derailments at slower speeds.
Head-end power (HEP): A scheme whereby the locomotive engine or a separate generator provides hotel power to carriages
Headboard: A sign attached to a locomotive to identify a named train or charter, or for other special occasions
Headstock: A transverse structural member located at the extreme end of a rail vehicle's underframe. The headstock supports the coupling at that end of the vehicle, and may also support buffers, in which case it may also be known as a "buffer beam".
Heavy haul: Heavy freight operations
High rail: The upper rail in a curve or superelevation which typically experiences the higher lateral loads and greater wear
Hole: A passing siding. Inferior trains "lay over in the hole" to let superior ones pass.
Home signal: See absolute signal.
Horn blocks: Plates lining the axlebox cut-outs in a locomotive frame to allow smooth vertical movement under control of the springs
Hostling: The action of shuttling a locomotive from the yard to the engine house or vice versa
Hotbox: An axle bearing that has become excessively hot due to friction
Hotbox detector: A device attached to the track which monitors passing trains for hot axles, and then reports the results via a radio transmission (typical in the US) or a circuit to the signal box (typical in the UK). See defect detector.
Hudson type: A steam locomotive with a 4-6-4 wheel arrangement
Hump: A raised section in a rail sorting yard that allows operators to use gravity to move freight railcars into the proper position within the yard when making up trains of cars. This is faster and requires less effort than moving cars with a switching engine.
Hunting: Swaying motion of a railway vehicle or bogie caused by the coning action on which the directional stability of an adhesion railway depends. The truck or bogie wanders from side to side between the rails, "hunting" for the optimum location based on the forces at play.

File:BNSF GP60B 346.jpg - Wikimedia Commons

src: upload.wikimedia.org

I

Independent brake or locomotive brake: The braking system that applies or releases the brakes of a locomotive independently from its train
Infill station or in-fill station: A train station built on an existing passenger line to address demand in a location between existing stations
Injector: A device to force water into a steam locomotive's boiler by steam pressure
Insulated rail joint (IRJ) or insulated block joint (IBJ): Rail joints incorporating insulation to isolate individual track circuits
Interchange: Any track or yard where rail cars are transferred from one carrier to another
Interlocking: An arrangement of switches and signals interconnected in a way that each movement follows the other in a proper and safe sequence
Intermodal freight transport: Moving goods by more than one type of vehicle, often achieved using shipping containers which can easily be transferred among railroad flatcars, ships, airplanes, and tractor-trailer trucks
Intermodal passenger transport: Moving people by more than one type of vehicle
Interoperability: Ability of a transport network to operate trains and infrastructures to provide, accept and use services so exchanged without any substantial change in functionality or performance
Island platform: A railway platform that has tracks along the full lengths of both sides

J

Joint bar or rail joiner: A metal plate that joins the ends of rails in jointed track
Jointed track: Track in which the rails are laid in lengths of around 20 m and bolted to each other end-to-end by means of fishplates or joint bars
Journal bearing: A bearing without rolling elements; a plain bearing
Journal box: The housing of a journal bearing. See also Axlebox above.
Jubilee type: A steam locomotive with a 4-4-4 wheel arrangement
Junction: A point at which two lines or separate routes diverge from each other

K

Keeper: A padlock or hook securing the lever of a hand-operated switch, thereby preventing the switch points from moving as rolling stock passes over them
Kick: To shove a car a short distance and uncouple it in motion, allowing it to roll free under gravity and/or its own inertia onto a track. Commonly practiced in bowl or hump yards to make up or break down trains or classify large numbers of cars in an expedient fashion. Differs from a flying switch in that the locomotive is pushing the car rather than pulling it when the cut is made.
Kicker: A freight car with a defect in its brake valve that causes the entire train's brake system to go into emergency when any application is made
Kinematic envelope (KE): The outline of the space beside and above the track that must be kept clear of obstructions for the train to pass. This can be larger than the static clearance around an unmoving engine or car. See also: loading gauge and structure gauge
Knuckle: The articulating part of a coupler that locks automatically in its closed position to join rail cars; so named because its movement resembles that of the human finger

L

Lead track: A non-main track from which several others branch within a short distance, such as within a rail yard or engine terminal
Level crossing, railroad crossing, railway crossing, train crossing, or grade crossing: A crossing on one level ("at-grade intersection")--without recourse to a bridge or tunnel--generally of a railway line by a road or path
Light engine: A locomotive travelling on its own, or perhaps with just a caboose (brake van) attached
Light rail: A city-based rail system based on tram design standards that operates mostly in private rights-of-way separated from other traffic but sometimes, if necessary, mixed with other traffic in city streets. Light rail vehicles (LRV) generally have a top speed of around 55 mph (89 km/h) though mostly operating at much lower speeds, more akin to road vehicles. Light rail vehicles usually run on trackage that weighs less per foot (due to a smaller track profile) than the tracks used for main-line freight trains; thus they are "light rail" due to the smaller rails usually used.
Link and pin: An obsolete method of coupling rail cars, consisting of manually dropping the coupling pin into the drawbar as the cars joined. Extremely hazardous to the brakemen of its day, it was outlawed in the United States by the Railroad Safety Appliance Act of 1893.
Local train: A train that stops at most, if not all, stations along its route
Lunar: An off-white color of railway signal light, like the Moon, achieved by the use of a clear lens of very light blue, to make it distinct from a light that has a broken lens.

M

Main generator: The electric generator in a diesel-electric locomotive that is coupled directly to the prime mover and feeds electrical energy to the traction motors
Main reservoir: The compressed-air tank of a locomotive containing source air for the brakes and other pneumatic appliances
Mallet: A type of articulated locomotive designed by the Swiss mechanical engineer Anatole Mallet (pronounced "mallay"). See Compound engine.
Manifest: An express freight train carrying a variety of general merchandise
Mechanical semaphore signal: A signal in which the aspect is conveyed by moving an arm
Mikado type: A steam locomotive with a 2-8-2 wheel arrangement
Milk train: An aggregator for transporting milk from farms to dairies, such as British Railways Milk Trains
Modalohr: An inter-modal car
Mogul type: A steam locomotive with a 2-6-0 wheel arrangement
Mountain type: A steam locomotive with a 4-8-2 wheel arrangement
Mud ring: The bottom of the water space surrounding a steam locomotive's firebox that collects solid deposits distilled from the water supply during the boiling process
Multiple aspect signalling: A system of colour-light signalling in which signals may show three or four aspects
Multiple unit (MU): A self-propelled rail vehicle that can be joined with compatible others and controlled from a single driving station. The sub-classes of this type of vehicle; Diesel Multiple Unit (DMU), Diesel-Electric Multiple Unit (DEMU) and Electric Multiple Unit (EMU) are more common terms. These may also be termed railcars.

N

Narrow gauge: Railroad track where the rails are spaced less than 1,435 mm (4 ft 8 ¹/₂ in) apart,
Northern type: A steam locomotive with a 4-8-4 wheel arrangement, also known in North America as "Pocono", "Niagara", "Confederation", "Greenbrier", and "Potomac"
Notch 8 or run 8: The eighth notch of a locomotive throttle control, indicating full power

O

Open wagon (UIC): A form of freight hauling car for bulk goods
Out to foul: When equipment is placed ahead of the fouling point of a switch turnout

P

Pacific type

A steam locomotive with a 4-6-2 wheel arrangement

Pannier tank

A tank locomotive where the water tanks are mounted on the boiler in pannier-like fashion

Pantograph

An apparatus mounted on the roof of a rail vehicle to allow the collection of electric current from overhead lines

Pennsy

Abbreviation for the former Pennsylvania Railroad

Per diem (pronounced by some U.S. railroaders per die-um, not per dee-um)

A fee paid by a rail company to the owner of a car (or wagon) for the time it spends on the company's property

An authorized living expense payment for some workers forced away from their home terminal

Permissive signal

A block signal whose most restrictive indication is stop and proceed. A permissive signal is identified by the presence of a number plate affixed to the mast or supporting structure. Proceeding beyond a permissive signal at stop is allowed at restricted speed if operating conditions enable a train operator to stop before reaching any train or obstruction.

Pilot

A deflective shield affixed to the front of a locomotive to protect its wheels from on-track debris; archaically called a "cowcatcher" See also: Pilot (locomotive)

An employee qualified on the operating rules and physical characteristics of a certain section of the railroad, assisting a crew member who is not so qualified See also: Railroad engineer

Pilot engine

The leading locomotive during a double-heading operation

An unattached locomotive driven a specified distance in front of a special train

Pilot man

Where it is necessary to temporarily work a section of line as single track (for instance if the other track of a double-track line is out of use), a person (the pilot man) acts as the single track token.

Piston

The moving component in the cylinder of a steam engine or internal combustion engine that translates into motion the force exerted by pressurised steam or quickly-burning fuel

Piston travel

A specified distance that a brake piston may move from its cylinder to the brake rigging. If the travel exceeds or falls short of this distance, the equipment must be set out for repair.

Pony truck

A two-wheel truck or bogie at the front of a locomotive

Porch

The extended walkway at either end of a U.S. locomotive

Porter

An employee who performs or performed (the role has now largely become obsolete) various physical duties, chiefly but not exclusively involving lifting. Various types of porter include:

A baggage porter assisting with luggage
An operating porter assisting with safeworking duties
A station porter assisting with general station duties
A lad porter being a junior station porter

Portion working: The practice of coupling two or more passenger trains together over common sections of their respective routes, but otherwise operating the trains separately
Position light signal: A block signal in which the relative position of the lights determines the meaning
Positive train control (PTC): A system of functional requirements for monitoring and controlling train movements with the aim of increasing operational safety
Possession: A period of time when one or more tracks are closed for maintenance. For the duration of the work, a person in charge of possession (PICOP) has control of the line. When work is complete the possession is relinquished and control of the line handed back to the signaller.
Pound: The weight (and thus the cross section) of a length of rail. A heavier rail can carry heavier loads with less distortion and less damage to the rails themselves and the roadbed.
Power: A locomotive or group of connected (MU'd) locomotives serving as the motive power for a train
Power braking: Pulling against the train brakes at the higher end of the locomotive's power output (e.g. notches five through eight on a conventional throttle). This is considered wasteful of fuel and brake shoes, and is therefore discouraged by most operating departments.
Prairie type: A steam locomotive with a 2-6-2 wheel arrangement
Prime mover: The internal combustion engine of a diesel locomotive
Pull apart: A rail broken from cold-related contraction
Push pole: A pole about 12 feet (366 cm) long and having a diameter of 5 inches (127 mm) and used in the United States between 1870 and the mid-1960s to push a freight car onto or off a siding or onto another track by being placed between a locomotive (on an adjacent track) and the freight car. The two ends of the poles were placed in receptacles called push pole pockets.
Push-pull train: A configuration for locomotive-hauled trains, allowing them to be driven from either end of the train, whether having a locomotive at each end or not. See also: Auto train. See Top and tail for train with locomotives at both front and back.

R

Rack railway, rack-and-pinion railway, or cog railway: A steep-grade railway with a toothed rack rail (usually between the running rails), used when adhesion is insufficient
Railbus: A passenger rail vehicle (typically non-articulated or rigid frame) that was derived from bus propulsion and construction technology, but which may evolve into larger dimensions, performance, and characteristics similar in appearance to a light DMU railcar
Railcar: A powered single unit or articulated passenger car, usually "railroad-derived" light DMU or EMU, with a driver's cab at one or both ends
Railfan: A hobbyist or enthusiast of trains
Rail grinder: A machine used to remove irregularities in the surface of the rails that may be self-powered or part of a consist
Rail profile: The cross section shape of rail. There are many rail profiles which are often specific to individual railroads. Rails need to be periodically scanned electronically, the data inspected and analysed, then re-profiled with rail grinding machines to maintain the safe and proper "rail profile". Rails that cannot be brought back to the proper rail profile are condemned and replaced.
Rail squeal: A screeching train-track friction sound, most commonly occurring on sharp curves or heavy braking
Rail tractor: A small petrol (gas) or diesel shunting (switcher) locomotive
Railroad car: Any railroad vehicle other than a locomotive
Railroadiana: Artifacts of railways around the world
Railway line: A railway route connecting two or more places or other railway routes; A railway route constructed by an organization, usually one formed for that purpose; A railway route which has been given the line name officially (e.g. by engineers line references in the UK); A set of railway routes which are bundled for publicity purposes (e.g. a UK train operating company)
Railway station: A train station, a stopping point for trains, usually with passenger access
Railway terminal: A building for passengers at the end of a railway line
Red: A colour generally associated with stop, when shown by signals or flags
Red zone: The area between, under, or within a few feet of cars and locomotives. To enter the zone, a ground employee must obtain protection from the locomotive engineer (if a locomotive is coupled) or a blue signal (if no locomotive is coupled).
Reefer: A refrigerated railcar, used to transport perishable goods
Refuge siding: A siding used as a passing place on a main line, where slow trains may be held whilst an express passes--a simpler, but less convenient, form of the passing loop
Reporting mark: A two- to four-letter code, assigned by the Association of American Railroads, that is applied to equipment operating on North American railroads to identify the owner
Rerail frog or rerailer: A metal casting slotted over the rail near the wheel of a derailed train car. The engine then pushes or pulls the car so that the derailed wheel runs up the rerailer and back onto the track.
Retarder: A device installed in a classification yard used to reduce the speed of freight cars as they are sorted into consists
Reverser or reverser handle: The handle that controls the directional control on a locomotive. See also Cut off.
Ribbon rail: Continuously welded rail
Right-side failure: A failure in a signalling or other safety critical system which leaves the system in a safe condition
Roadrailer: A highway trailer, or semi-trailer, that is specially equipped for direct use on a railroad
Rolling stock: In UK parlance, any railway vehicle that is not capable of moving under its own power; In US parlance, any railroad car or locomotive
Rookie: See Trainee.
Rotary: Short for rotary snowplow, an extreme-duty railroad snowplow used mainly in the mountain ranges of the American West
Roundhouse: A circular or semi-circular structure used for storage and running maintenance of locomotives
Route selector panel, punch box, or train-identification pushbuttons (New York City Subway): A box or panel adjacent to a rail line at an interlocking, with several buttons for train operators to select a desired route, which is then either communicated to a signal tower where an operator fulfills the request, or switched automatically
Ruling gradient: The longest or steepest grade on a division, thus setting the standard for track speeds, locomotive tonnage ratings, and train handling instructions
Runaway: A heavy train that has lost speed control while descending a steep grade, due to either brake failure or poor preparation by the crew
Running track: An other-than-main track, typically providing access to a yard or industry and governed by the requirements of restricted speed
Run-round: The practice of detaching a locomotive from its train, driving it to the other end of the train and re-attaching it, to allow the train to proceed in the direction it has just come from (e.g. when it reaches its destination and forms a service in the other direction).
Run-through power: Locomotives that remain attached to a manifest or unit train from their home rails over the tracks of a receiving railroad until the train reaches its final destination

S

Saddle tank: A tank locomotive with the water tank mounted on top of the boiler like a saddle
Safeworking: The system of rules and equipment designed to ensure the safe operation of trains
Sand: A granular material sprayed onto the rail just in front of the drive wheels to improve traction
Sandbox: A container on locomotives and self-propelled multiple units, or trams, that run on tramways and adhesion railways. The container holds sand which can be dropped onto the rail to improve rail adhesion under wet, steep, or slippery rail conditions. The sandbox and operating mechanism are collectively known as sanding gear.
Sandite: Consists of a mixture of sand, aluminium, and a unique type of adhesive, used instead of plain sand for extreme slippery rail conditions
Santa Fe type: A steam locomotive with a 2-10-2 wheel arrangement, named for the Atchison, Topeka and Santa Fe Railway--the first railroad to use such a configuration
Saturated locomotive: A steam locomotive not equipped with a superheater; the steam thus remains at the same temperature as the water in the boiler
Scale: Solid debris distilled from boiling water in a steam locomotive. To prevent corrosion damage from scale build-up, the locomotive must undergo a boiler wash once each operating month.
Schnabel car: A specialized type of freight car for extra heavy and over sized loads where the car is loaded in such a way that the load forms part of the car superstructure
Searchlight: A signal with a single light source usually capable of displaying three different colors. An internal mechanism governs the color displayed.
Section: A portion of a train that may be operated independently or combined with other sections to operate as a single unit; A portion of railway line designated for signalling or maintenance; An interior portion of a sleeping car made up of two double seats during daytime that convert to two double berths during nighttime
Semaphore signal: A type of signal that has a moving arm to change the indication
Shay locomotive: A type of geared steam locomotive built to the patents of Ephraim Shay
Shunt: In UK and Australian parlance, to make up and divide trains in sidings, to move trains to or from sidings, or to move trains between platforms in a station
Shuttle train: A train, usually a passenger service, that runs back and forth, usually over a relatively short distance, such as between a junction station and a branch-line terminus.
Side tank: A tank locomotive with water tanks mounted each side of the boiler
Siding: A section of track off the main line. Sidings are often used for storing rolling stock or freight. A siding is also used as a form of rail access for warehouses and other businesses, where the siding will often meet up with loading docks at rail car height in the building. In the U.S. the term is also used to cover the British term: loop. Also, a passing track in the U.S.
Signal: A device that indicates the condition of the line ahead to the driver of a train
Signal box: A building or room which houses signal levers (usually in a frame), a control panel or a VDU-based control system
Signal passed at danger: An event in which a train passes a signal to stop without authorization to do so
Signalman: A person in charge of the signalling at a station or junction, often in a signal box
Slippery rail: The condition of fallen leaves or other debris lying on and clinging to a railroad track that could cause train wheel slippage, resulting in premature wheel wear and train delays
Slow order: A local speed restriction below the track's normal speed limit often designated by yellow and green flags. Slow orders can be imposed on a temporary basis to protect, for example, maintenance of way employees while sections of track are under repair. Widely used in areas where track is substandard and in need of repair.
Slug: A locomotive that contains traction motors yet lacks the diesel engine to create its own power, which is instead supplied by a connected mother locomotive
Smokebox: An enclosed (normally cylindrical) space attached to the end of the boiler opposite the firebox on a steam locomotive (normally the front). Supports the stack; steam pipes to and from the cylinders pass through here; contains the blastpipe where the exhaust steam is used to provide draft for the fire. In superheated locomotives, also contains the superheater header and (optionally) a front-end throttle.
Snowplow, snow plow, snowplough, or snow plough: A rail service vehicle used for snow removal from train tracks
Snow shed: A long shelter erected over a railroad track on the side of a mountain to protect the line from avalanches and drifting
Span bolster: The beam between two bogies
Spike: A bolt, pin, or nail used to hold rails, or plates connected to the rails (known as tie plates), to sleepers (ties)
Spiral easement: See Track transition curve. Also known as tangent lead-in.
Spreader: Maintenance of way equipment designed to spread or shape ballast profiles, remove snow, clean and dig ditches as well as trim embankments
Self-propelled ultrasonic rail testing (SPURT) (India): A self-propelled rail-defect detector car
Staff and ticket: A method of safeworking involving a token
Standard gauge: A gauge where the rails are spaced 1,435 mm (4 ft 8 ¹/₂ in) apart--by far the most common gauge worldwide
Station master: The person in charge of a station
Steam generator: A device generally used in passenger trains to create steam for heating. The steam generator is usually in the locomotive but may also be located in other cars.
Steam reverser: A reversing gear worked by a steam cylinder controlled from the cab
Steward: A person in a dining car with a role similar to that of a Maitre d'Hotel
Stretch braking: Pulling against train brakes at the lower end of a locomotive's power output (e.g. notches one through four) of a conventional throttle, thus keeping coupler slack stretched and permitting smoother train handling. This is considered most effective on undulating track profiles or when dynamic braking is not available.
Subdivision: The trackage area within a division covered by a single timetable
Supercharger: A mechanical device that boosts the pressure of engine intake air to above atmospheric level, causing an increase in power. Not to be confused with the blower used to scavenge the cylinders of a naturally aspirated two-stroke Diesel engine.
Superheater: A device in a steam locomotive that raises the temperature of saturated steam substantially beyond the boiling point of water, increasing power and efficiency
Survey: To determine the position of constructed objects, including rail infrastructure, in relation to the earth's surface. This is accomplished by measuring angles and distances based on the principles of triangulation.
Surveyor: A person assigned to perform survey work
Switchman: A railroad worker responsible for assembling trains and switching railroad cars in a yard

T

Tamping machine: Generally, a locomotive used in track maintenance and equipped with track lifting facilities, and paddles enabling ballast to be pushed beneath a rail track so as to assure its level and cant
Tank car: A type of rolling stock designed to transport liquid and gaseous commodities
Team track: A spur or siding for loading freight, often used by firms not having their own direct rail access
Tender: A specialized rail car attached to a steam locomotive to carry its fuel and water supplies, along with tools and flagging equipment
Terminal railroad (or terminal railway): A company in the United States that owns no cars of its own and transports only the railroad cars of other companies around a specific terminal station
Texas type: A steam locomotive with a 2-10-4 wheel arrangement
Third rail: An electrified rail that runs along the tracks, giving power to trains. Used mostly in subways and rapid transit systems.
Through coach: A passenger coach that is disconnected from one train and attached to another before continuing on with its journey, thus avoiding the need for passengers themselves to switch trains
Through platform: The standard platform and track arrangement at a station. The train pulls alongside the platform, arriving from one end of the station, and may pass out the other end of the station by continuing along the same track
Through routing: Combining two or more different railways onto a common length of track. This is often done to eliminate redundant trackage or improve service.
Tie plate: A plate which is bolted to sleepers, holding the rails in place
Trailer on flat car (TOFC): Intermodal freight transport
Token: A physical object given to a locomotive driver to authorize use of a particular stretch of single track
Track bed or trackbed: The foundation of rail tracks
Track bulletin: A form used by railroad employees that shows the locations of slow orders, maintenance of way work locations, and other conditions affecting the track and movement of trains
Track circuit: An electrical circuit that detects the presence of locomotives or cars (as their wheelsets electrically bond the rails) in a block of track, and provides real-time input to signaling logic
Track transition curve: The gradual application of superelevation and tighter curve radius, calculated with reference to the anticipated line speed and the final curve radius, on the approach to a bend. Also known as the transition spiral and spiral easement.
Trackside objects: See Wayobjects.
Traction motor: A large electric motor that powers the driving wheels of an electric or diesel-electric locomotive
Traction supply: The electric source for the traction motors of electric trains
Tractive effort: The pulling or pushing force exerted by a locomotive or other vehicle
Trailing: A turnout where both legs merge in the direction of travel--the opposite of facing
Trainman: An employee assigned to train service, such as a conductor, brakeman, or switchman
Trainmaster, terminal manager, or road manager: An employee who supervises operations over a given territory
Train order: The process whereby signallers or dispatchers can change the order or timing of trains to maximise overall train service performance in real time
Trainset: A group of rolling stock that is permanently or semi-permanently coupled together to form a unified set of equipment. Trainsets are most often used in passenger train configurations.
Tram: A city-based rail system that typically shares its operational space with other vehicles and often runs on, across, or down the center of city streets
Tram-train: Trams that are designed to run both on the tracks of a city-based rail system and on the existing railway networks. Tram-trains' dual-voltage capability makes it possible to operate at lower speeds on city streets and at over 60 miles per hour (97 km/h) on main line tracks allowing travel in an extended geographical area without changing the method of transport.
Treadle: A mechanical or electrical device for detecting the presence of a rail vehicle with pin-point accuracy, unlike a track circuit, which provides detection over an arbitrary distances
Turnout or points: A switch
Turntable: A section of track that can rotate, allowing locomotives and rolling stock to be reversed, and also allow a large number of engine maintenance sidings to be accessed in a small area

U

Unit train: A train in which all cars (wagons) carry the same commodity and are shipped from the same origin to the same destination, without being split up or stored en route

V

Vacuum brake: A continuous train brake which is fail-safe in operation; the brake is powered by a vacuum from the locomotive but the application is actually by atmospheric pressure when the vacuum is released. Now largely superseded by the air brake.
Valve gear: The linkage mechanism that operates the valve for a driving cylinder, to alternately admit steam to the cylinder and then exhaust it when the piston's stroke is nearly complete

W

Standpipe: A device used for delivering a large volume of water into the tank or tender of a steam locomotive
Water gauge or water glass: A device showing the level of water in the boiler
Way car: An alternate term for a caboose used by the Chicago, Burlington and Quincy Railroad, Chicago and North Western Railway, and Atchison, Topeka and Santa Fe Railway
Way freight: See Local train.
Wayobjects or wayside objects: Trackside objects or any structures at the wayside or beside the rail tracks usually within the right-of-way, such as railway signals, third rails, overhead lines and their supports, electrification systems, platforms, or boom barriers
Wayside: Trackside
Well tank: A type of tank locomotive. The water tank is mounted between the frame plates, beneath the cab and boiler.
Well wagon (UIC): A flat wagon with a depressed centre used for carrying extra tall loads
Wheel: The rolling component typically pressed onto an axle and mounted on a rail car or locomotive truck or bogie. Wheels are cast or forged (wrought) and are heat treated to have a specific hardness. New wheels are trued to a specific profile before being pressed onto an axle. All wheel profiles need to be periodically monitored to insure proper wheel to rail interface. Improperly trued wheels increase rolling resistance, reduce energy efficiency and may create unsafe operation. A railroad wheel typically consists of two main parts: the wheel itself, and the tire around the outside. A railway tire is itself steel, and is typically heated and pressed onto the wheel, where it remains firmly as it shrinks and cools.
Wheel climb: The process of a wheel climbing up and often off the inside or gauge side of the rail. It is a major source of derailments. Wheel climb is more likely to occur in curves with wheels whose flanges are worn or have improper angles. See Rail adhesion.
Wheel flange: The inner section of a wheel that rides between the two rails. The angle between the wheel tread and flange is often specific to the rail to prevent wheel climb and possible derailments. See Rail adhesion. The wheel flange is part of the wheel tire.
Wheel-rail interface: The on-contact interaction between wheels and rails. The term is used in connection with the design and management of their interaction.
Wheel slip: The loss of traction due to a slippery rail or wheel. Wheel slip was common with steam engines as they started to move due to the excessive torque often generated at low speed. Steam engines carried sand dispensing gear to increase traction at the start of motion.
Wheeltapper: An historical railway occupation; people employed to tap train wheels with hammers and listen to the sound made to determine the integrity of the wheel; cracked wheels, like cracked bells, do not sound the same as their intact counterparts. The job was associated with the steam age, but they still operate in some eastern European countries. Modern planned maintenance procedures have mostly obviated the need for the wheel-tapper.
Wheel tread: The slightly conical section (often with a 1 in 20 slope) of a railroad wheel that is the primary contact point with the rail. See Rail adhesion.
Whistle: Train whistles are used as a safety warning and also by the engineer to communicate to other railroad workers. See train whistle for a description of the whistle code used to communicate. Also a nickname for an air horn on a diesel locomotive. Steam engine whistles were historically known as chimes in the US during the 19th century.
Whistle post: An advance warning to the engineer of an upcoming grade crossing. It is the point at which the engineer should begin sounding the whistle or horn.
Whyte notation: A system of describing steam locomotive wheel arrangements (e.g. 4-6-4, 2-10-2). The first number indicates the number of "pilot" wheels that help lead the engine into turns. The second is the number of coupled wheels ("drivers"). Third are the trailing idler wheels, usually to provide support to larger fireboxes. Articulated locomotives are similarly described. For example, a Union Pacific "Big Boy" would be described as a 4-8-8-4, wherein the pilot has four wheels, followed by two sets of drivers, eight wheels per set, and a four-wheel trailing bogie under the firebox. The numbers include the wheels on both sides of the engine, so a 2-8-2 engine would have one idler, four drivers, and a final idler on each side of the engine.
Wigwag: A largely superseded Level or Grade Crossing Warning Signal consisting of a swinging disc facing road traffic with a red light in the centre. The disc normally hangs straight down, but an approaching train will set it swinging from side to side, the red light will illuminate or flash, and a bell will ring.
Working water, foaming, or priming: The condition of a steam locomotive drawing water through its throttle valve, cylinders, and smokestack, often causing damage to the cylinders or running gear
Wrong-side failure: A failure in a signalling system that leaves the system in a dangerous condition

Y

Yard: A location where rolling stock is switched to and from trains, freight is loaded or unloaded, and consists made up
Yellow: A colour associated with a warning or a need to slow down when used by flags or signals, but the exact meaning varies from railway to railway

Z

Zig zag or switchback: A method of climbing and descending steep gradients, where shallow-gradient track reverses direction for a while, and then reverses again to continue in the original direction

References

External links

British Railways compared to American Railroads

Source of the article : Wikipedia

Glossary of rail transport terms

Jumat, 29 Desember 2017